🌡️ Heatwaves are becoming a major issue for housing, commercial spaces, and industrial buildings. With summers becoming increasingly challenging, maintaining indoor comfort is no longer just a matter of well-being: it is also a question of adapting buildings to the climate of tomorrow. Roofs exposed to direct sunlight, skylights that allow significant radiation to enter, spaces that are difficult to cool... Certain surfaces greatly contribute to the heating of buildings.
At Couleurs d’Argence in Lunel, we invite you to discover three complementary Maestria solutions : THERMOSTRIA, THERMOGLASS et THERMOPRIM.
☀️ Climate change: a new challenge for buildings
Heat waves are becoming more frequent, longer-lasting, and more intense. In the south of France, the consequences are tangible: heavily exposed roofs, rooms that accumulate heat, professional spaces that are difficult to keep comfortable, and increased reliance on ventilation or air conditioning.
The question is no longer just about cooling buildings once they are hot, but also about limiting their heating by acting on exposed surfaces. Summer comfort is prepared from the design stage, but also during renovation and maintenance.
🏠 THERMOSTRIA : a thermo-reflective solution for roofs
THERMOSTRIA is a single-component, water-based thermo-reflective paint with a velvety finish, designed for cool roofing systems. Its white shade promotes the reflection of solar radiation to limit roof heating and help improve indoor thermal comfort.
Its main strengths
- ☀️ Thermo-reflective paint for roofing and cool roofing solution.
- 🌡️ Contribution to the limitation of warming related to solar radiation.
- 🌿 Very low VOC content stated on the product sheet: 1 g/L.
- 🛡️ Good UV resistance.
- 💧 Resistance to stagnant water under the conditions specified by the system.
- 🎨 Single-component aqueous application with a velvety finish.
The technical data sheet specifically provides for systems on bituminous waterproofing complexes, non-asbestos fiber cement, and steel trays. The preparation and primer vary depending on the nature of the substrate. It is necessary to check the condition of the roof, its waterproofing, water drainage, slopes, and any areas of corrosion.
THERMOSTRIA is a thermo-reflective coating: it does not replace appropriate thermal insulation, waterproofing repairs, or a building study.
👉Discover THERMOSTRIA

💎 THERMOGLASS : limit solar radiation on translucent surfaces
Skydomes, skylights, light wells, and translucent panels provide valuable natural lighting, but they can also allow a significant amount of solar radiation to enter. In workshops, warehouses, and professional spaces, this exposure can increase thermal discomfort.
THERMOGLASS is a translucent, single-component, water-based coating specifically designed for glass, polycarbonate, skylights, light wells, and corrugated sheets made of fiberglass-reinforced polyester.
The announced technical data
- ☀️ Direct solar energy transmission factor: 32.1% according to NF EN 410.
- 💡 Light transmission factor: 28.6% according to ASTM E403 method.
- 🛡️ Excellent adhesion on the intended surfaces, quick drying, and good resistance to soiling.
These values characterize the product according to the specified testing methods. They should not be interpreted as a universal percentage of heat removed or as a guarantee of indoor temperature.
THERMOGLASS thus allows for action on a point often overlooked in improving summer comfort: the light-reflecting surfaces on the roof.
👉 Discover THERMOGLASS
🧱 THERMOPRIM : an essential preparation for the THERMOSTRIA system
A durable protection begins with proper preparation of the substrate. On certain old bituminous complexes or non-asbestos fiber-cement substrates, the direct application of a finishing coating is not always appropriate.
THERMOPRIM is the water-based primer designed to prepare certain substrates before the application of THERMOSTRIA.
- 🔗 Promote system adherence.
- 🧱 Fix porous substrates, particularly certain old fiber-cements.
- 🛡️ Block the escalation of tasks.
- 💧 Limit the migration of bitumen.
THERMOPRIM is intended for the THERMOSTRIA system. It should not be considered a universal primer: the selection and application must follow the Maestria technical data sheet.
👉 Discover THERMOPRIM
🔧 Which solution to choose according to the building?
Each surface requires a solution tailored to its nature and condition. Here is a summary table to identify the products to study based on the situations encountered.
| Situation | Solution to study |
| Roof exposed to the sun | THERMOSTRIA |
| Bituminous complex before THERMOSTRIA | THERMOPRIM, according to the planned system |
| Asbestos-free fiber cement THERMOSTRIA | THERMOPRIM, according to the planned system |
| Skydome or light well | THERMOGLASS |
| Polycarbonate or glass surface | THERMOGLASS, after compatibility verification |
| Translucent reinforced polyester panels | THERMOGLASS |
🏡 For individuals: improving the comfort of their home
A house exposed to the sun can become difficult to live in during extreme heat. Before considering new equipment, it is helpful to examine the surfaces that contribute to the warming.
- 🏠 Check the condition of the roof and its insulation.
- ☀️ Study an appropriate thermo-reflective protection.
- 🪟 Protect windows and glass surfaces from direct sunlight.
- 🌤️ Close shutters and blinds during the hottest hours.
- 🌬️ Ventilate early in the morning, in the evening, or at night when the outside air is cooler.
- 💨 Provide appropriate ventilation.
A technical paint can contribute to a comprehensive approach to improving summer comfort, but it does not replace effective insulation or other building protections.
🏭 For professionals: anticipating thermal constraints
The high temperatures also affect industrial buildings, workshops, warehouses, retail spaces, technical rooms, and buildings open to the public. Large roof areas and skylights can represent sensitive points.
The choice of the system must take into account the nature and condition of the substrate, its age, exposure, the presence of an existing waterproofing system, stormwater management, and operational constraints. For ERP or ICPE, the project must also be verified against applicable requirements and current technical documents.
THERMOSTRIA and THERMOGLASS provide targeted responses, respectively regarding roofs and translucent surfaces. THERMOPRIM complements the THERMOSTRIA system when the substrate requires this primer.
🌿 Summer comfort: a holistic approach, not a miracle product
Reducing the overheating of a building never relies on a single intervention. The protection of roofs and translucent surfaces can be part of a strategy that combines thermal insulation, exterior solar protections, well-thought-out ventilation, management of openings, suitable materials, and greening when the configuration allows.
The goal is to limit heat gains, to maintain occupant comfort, and, when possible, to reduce reliance on mechanical cooling.
📍 Colors of Argence in Lunel: Maestria solutions for your projects
Individuals and professionals, each building has its own constraints. A bituminous roof, a steel tray, a skylight, or a polycarbonate surface do not require the same preparation or coating.
At Couleurs d’Argence in Lunel, discover the Maestria solutions
Do you have a roofing renovation project, a professional building protection project, or a summer comfort improvement project for your home? Contact us to identify the solution that suits your needs and your project.
❓ FAQ – Heat-Reflective Paints and Cool Roofing
What is cool roofing?
Cool roofing involves applying a coating to a roof that has a high capacity for reflecting solar radiation. The goal is to limit the solar energy absorbed by the roof and help reduce its heating.
How can we reduce heat in a house?
THERMOSTRIA is designed to reflect a portion of the solar radiation received by the roof. It can help limit heating and improve indoor comfort. The result depends on insulation, configuration, exposure, ventilation, and the condition of the roof.
What paint to use for a skydome or a skylight?
THERMOGLASS is a translucent coating intended primarily for skylights, light wells, polycarbonate, glass, and fiberglass-reinforced polyester. It reduces incoming solar radiation while maintaining light transmission.
Should a primer be used with cool roofing?
THERMOPRIM is a bonding primer intended for the THERMOSTRIA system. It prepares certain substrates, particularly bituminous complexes and non-asbestos fiber cement, and helps promote adhesion while limiting the rise of stains and bitumen migration..
Does a heat-reflective paint replace the insulation of a roof?
No. A thermo-reflective paint acts on the solar radiation received by the surface, while insulation limits heat transfer through the wall. These approaches can be complementary.
