FLOOR RANGE

Printing layer for closed support, concrete or tiles, before application of paints or coatings, promotes impregnation and penetration into the support, two-component, Class A+, solvent-free epoxy

Versatile adhesion primer for mortars on all supports, one-component, quick-drying, INT/EXT.

Primer for pre-prepared concrete, under pigmented solvent-free epoxy coating, recommended for floors intended to be covered with paint, semi-thick or thick coating, such as public establishments, car parks, etc., two-component, satin matt finish, Class A+

Primer, epoxy resin, tolerant, solvent-free, serving as an interface between old funds perfectly adherent and an epoxy or polyurethane finish from the STRIASOL range, good wetting power, good adhesion on old substrates, glossy, Class A+

Mineral primer for very porous or closed bottoms, for concrete, cement, for interior and exterior, absorption regulator and saturator, improves the adhesion of the finish, single-component, white, matt finish, based on water-based acrylic resin

Underlay of the STRIASOL HD 59 system, water-based, for floors and walls of technical rooms, food production sites, poorly ventilated rooms where solvent-based paints cannot be used, can be applied to concrete, old paints, satin finish, two-component, water-based epoxy, Class A+

Fast-drying, pigmented, concrete primer for floors subject to heavy traffic requiring rapid recirculation, applicable on porous concrete in car parks, industrial floors, warehouses, loading docks etc., reinforces and blocks porous concrete substrates, has excellent adhesion, is compatible with old epoxy or polyaspartic resin bases, recoatable after 3 hours (at 20°C and RH 60%), which allows it to be put back into service after 12 hours, glossy finish, two-component polyaspartic, Class A+