UNIVERSAL PRINTING RANGE

Printing layer for closed support, concrete or tiles, before application of paints or coatings, promotes impregnation and penetration into the support, two-component, Class A+, solvent-free epoxy

Versatile adhesion primer for mortars on all supports, one-component, quick-drying, INT/EXT.

Primer for pre-prepared concrete, under pigmented solvent-free epoxy coating, recommended for floors intended to be covered with paint, semi-thick or thick coating, such as public establishments, car parks, etc., two-component, satin matt finish, Class A+

Impregnation primer, water-based epoxy, for concrete supports, intended for the interior of tanks, vats, intended to contain drinking water or wastewater, or for fixing concrete floors in industry, without benzyl alcohol, low odor, two-component, glossy finish, CE class

Epoxy resin, solvent-free, multifunction binder used to create "printed to zero", mass layer, printing primer, for interior and exterior use if covered, two-component, good penetration into the support, for light traffic, glossy finish, class A+, EDF

Epoxy resin, solvent-free, quick-drying, dustproof, intended for laboratory floors, nuclear power plants, etc., multifunction binder used for the production of "drawn to zero", repair mortar, primer, for interior use and exterior if covered, two-component, excellent adhesion, for light to medium traffic, glossy finish, class A+

Epoxy resin, solvent-free, hard and dustproof, intended for laboratory floors, nuclear power plants, etc., multifunction binder used for the production of "drawn to zero", repair mortar, primer, for interior and exterior use if covered, two-component, excellent adhesion, good mechanical resistance, for light to heavy traffic, glossy finish, class A+, EDF

Primer, epoxy resin, tolerant, solvent-free, serving as an interface between old funds perfectly adherent and an epoxy or polyurethane finish from the STRIASOL range, good wetting power, good adhesion on old substrates, glossy, Class A+

Mineral primer for very porous or closed bottoms, for concrete, cement, for interior and exterior, absorption regulator and saturator, improves the adhesion of the finish, single-component, white, matt finish, based on water-based acrylic resin

Epoxy resin, solvent-free, multifunctional, binder for the production of "drawn to zero", layer of mass or mortar, primer for epoxy or polyurethane system from the STRIASOL range, two-component, excellent adhesion, good wetting power, colourless, glossy finish, Class A+

Underlay of the STRIASOL HD 59 system, water-based, for floors and walls of technical rooms, food production sites, poorly ventilated rooms where solvent-based paints cannot be used, can be applied to concrete, old paints, satin finish, two-component, water-based epoxy, Class A+

Floor covering, multifunctional, solvent-free, allowing for the creation of primers, mass layers or finishes, applicable on concrete, steel, asphalt and percolated asphalt, and intended for braking areas, dangerous curves, bridges and walkways of roads etc..., excellent resistance to abrasion and de-icing salts, glossy finish, based on modified epoxy resin, two-component, Class A+

Fast-drying, pigmented, concrete primer for floors subject to heavy traffic requiring rapid recirculation, applicable on porous concrete in car parks, industrial floors, warehouses, loading docks etc., reinforces and blocks porous concrete substrates, has excellent adhesion, is compatible with old epoxy or polyaspartic resin bases, recoatable after 3 hours (at 20°C and RH 60%), which allows it to be put back into service after 12 hours, glossy finish, two-component polyaspartic, Class A+