FLOOR PAINT

Decorative floor paint, quick-drying, intended for premises with light traffic (offices, corridors, laundry rooms, etc.), removes the dusty appearance of concrete floors, good abrasion resistance, INT/EXT, satin finish, single-component, modified alkyd resin, solvent phase

Underlay of the STRIASOL HD 59 system, water-based, for floors and walls of technical rooms, food production sites, poorly ventilated rooms where solvent-based paints cannot be used, can be applied to concrete, old paints, satin finish, two-component, water-based epoxy, Class A+

Floor covering, multifunctional, solvent-free, allowing for the creation of primers, mass layers or finishes, applicable on concrete, steel, asphalt and percolated asphalt, and intended for braking areas, dangerous curves, bridges and walkways of roads etc..., excellent resistance to abrasion and de-icing salts, glossy finish, based on modified epoxy resin, two-component, Class A+

Repair mortar for industrial floors, solvent-free epoxy, designed for the renovation of cement or concrete screeds, the removal of "potholes", the production of screeds, compatible with any epoxy or polyurethane finish from the floor range, matt finish, 3 components, Class A+

Repair mortar, compactable by helicopter, designed for the renovation of degraded cement, concrete or asphalt screeds, the removal of "potholes", the creation of screeds, public, industrial, laboratory floors, etc., particularly recommended for floors that have to withstand heavy and heavy traffic, slightly rough finish, 3 components, Class A+, modified epoxy, solvent-free

Quick-drying floor covering, intended for premises subject to heavy traffic (car parks, public, industrial and household floors, warehouses, etc.), abrasion and impact resistance, glossy finish, two-component, Class A+, solvent-free epoxy, applicable by roller

Polyurethane varnish, sealer intended for the protection of concrete or wood floors indoors only, or as a finish on substrates already coated with an old epoxy or polyurethane paint in gymnasiums and public establishments (classrooms, corridors, etc.), glossy, two-component, solvent phase, Class B finish

Polyurethane varnish, a varnish intended for the protection of concrete or wood floors exclusively indoors, or as a finish on surfaces already covered with an old epoxy or polyurethane paint in gyms and public establishments (classrooms, hallways...), satin finish, two-component, solvent phase, Class B

Floor paint, intended for car parks, garages, industrial premises, applied to concrete, steel or galvanised steel previously treated with EPODUX PRIMER 61-134 v01, old epoxy paint perfectly adherent, two-component applied in thin film, semi-gloss finish, Class A+, epoxy in solvent phase

Semi-rigid flooring, intended for premises subject to heavy traffic (car parks, public floors, industrial, warehouses, loading docks, etc.), protection of asphalt, percolated asphalt or concrete, indoors only, abrasion resistance to impacts and chemicals petrol, diesel, glossy finish, two-component epoxy, Class A+

Solvent-free semi-thick coating, indoor floors only, intended for premises subject to heavy traffic (car parks, industrial and household public floors, warehouses, loading docks, nuclear power plants, etc.), abrasion, impact and chemical resistance, glossy finish, two-component, epoxy, Class A+, EDF certification, applicable to the roller

Black floor paint for the protection of asphalt or asphalt asphalt floors, airports, petrol stations, garages, excellent resistance to bad weather, kerosene, abrasion, traffic, and slipperiness, matt finish, one-component, water-based acrylic

Semi-thick, fast-drying coating, intended for premises subject to heavy traffic requiring rapid recirculation, applicable on concrete and derived from car parks, industrial floors, warehouses, loading docks etc., good resistance to abrasion, impacts, UV, bad weather (excluding rain 3 hours) and to a large number of chemicals, glossy finish, two-component polyaspartic, Class A+

Fast-drying, pigmented, concrete primer for floors subject to heavy traffic requiring rapid recirculation, applicable on porous concrete in car parks, industrial floors, warehouses, loading docks etc., reinforces and blocks porous concrete substrates, has excellent adhesion, is compatible with old epoxy or polyaspartic resin bases, recoatable after 3 hours (at 20°C and RH 60%), which allows it to be put back into service after 12 hours, glossy finish, two-component polyaspartic, Class A+

Self-levelling, UV-resistant, weather-resistant coating for concrete, perglued, asphalt (consult our technical services), steel or galvanised steel previously coated with a layer of EPODUX PRIMER 61-134 v01 or EPODUX IM 209 v01, intended for "open" car parks, walkways, exhibition halls, etc. shopping arcade entrances, etc., glossy finish, 3 components, polyurethane, solvent-free, Class A+

Flooring, for concrete, tiles, bituminous, subject to light to heavy traffic, indoors only, intended for car parks, traffic areas, garages, exhibition halls, shopping malls etc., very bright and specular gloss, good curing, glossy finish, two-component, polyurethane, solvent-free, Class A+

Self-levelling, smooth, coating for concrete, tiles, bituminous, subject to light traffic, indoors only, intended for prisons, hospitals, leisure centres etc..., resistant to normal creep of bituminous substrates, chemicals, very bright, glossy finish, 3 components, polyurethane, solvent-free, Class A+

Flooring, with high solids, for concrete, steel or galvanized steel previously treated with EPODUX PRIMER 61-134 v0, for outdoor use, intended for open car parks, walkways, exhibition halls, shopping arcade entrances, etc..., excellent resistance to chemicals, UV, weathering, non-yellowing, non-chalking, glossy finish, two-component, polyurethane, solvent-free

Repair mortar, compactable with a smoothing machine, designed for the renovation of degraded concrete or bitumen screeds, the removal of "potholes", the creation of screeds, public, industrial, laboratory floors, etc., particularly recommended for floors that have to withstand heavy and heavy traffic, matt finish, 3 components, Class A+, modified epoxy, solvent-free